Home \ Browse Journal \ 2025 \ 2025 Volume 8 Issues 1–3 \ Synthesis of Reactive Sydnonyl-Substituted Silanes

2025 Volume 8 Issues 1–3

инэос-open
Open Access
cc-by-nc

INEOS OPEN, 2025, 8 (1–3), 158–159

Journal of Nesmeyanov Institute of Organoelement Compounds
of the Russian Academy of Sciences

Download PDF
Electronic supplementary information
DOI: 10.32931/io2562a

issue_cover_8_1-3.png       

Synthesis of Reactive Sydnonyl-Substituted Silanes

I. I. Shakurov,* E. S. Trankina, and I. A. Cherepanov

Nesmeyanov Institute of Organoelement Compounds, Russian Academy of Sciences, ul. Vavilova 28, str. 1, Moscow, 119334 Russia
 

Corresponding author: I. I. Shakurov, e-mail: ivan-shakurov@mail.ru
Received 9 December 2024; accepted 9 February 2025

Abstract

io2562a_abs_fig   

The synthesis of sydnonyl-substituted silanes with reactive chloro and ethoxy groups was accomplished. It was shown that the resulting silanes are capable of entering the hydrolytic polycondensation.

Key words: sydnones, hydrosilylation, hydrolytic polycondensation.

 

Introduction

Organosilicon polymers and materials based on them are widely used in various fields of practical activity. In recent years particular attention has been drawn to the synthesis of polysiloxanes with different polar substituents capable of participating in the formation of hydrogen bonds, dipole–dipole interaction or π–π stacking, leading to the improved strength properties owing to an increase in the intermolecular interaction [1].

Mesoionic compounds, the most studied representatives of which are sydnones, were chosen as promising substituents. They feature a unique electronic structure, high dipole moment, as well as a broad spectrum of biological activity [2–4]. The introduction of such groups will enable the synthesis of new polymeric materials with improved physical and mechanical characteristics (dielectric characteristics, elastic modulus, optical properties, etc.) and impart them bactericidal and fungicidal properties, thereby expanding their application scope (optics, robotics, medicine, etc.).

The hydrosilylation reaction is a convenient method for the chemical modification of organosilicon polymers and synthesis of functionalized silane monomers for polycondensation processes [5–7]. Various transition metal complexes (platinum, iridium, palladium, and rhodium compounds) are widely used as the catalysts in the hydrosilylation reaction.

In the present work, a series of sydnonyl-substituted silane monomers with hydrolyzable groups were synthesized by the hydrosilylation reaction. The process of hydrolytic polycondensation involving the resulting compounds was studied.

Results and discussion

To achieve the goal, 3-(but-3-en-1-yl)-4-phenylsydnone 1 was synthesized by the previously developed method (Scheme 1) [8].

io2562a_scheme1_fixed   

Scheme 1. Synthesis of 3-(but-3-en-1-yl)-4-phenylsydnone.

Compound 1 was introduced into the hydrosilylation with a range of silanes bearing different numbers of reactive groups in order to obtain the corresponding mono-, di-, trichloro- and triethoxysilane monomers 2a–e. Karstedt's [Pt]0 catalyst and Wilkinson's rhodium complex [RhCl(PPh3)3] were tested as the catalysts. The optimization of the reaction conditions revealed that almost quantitative yields of the target sydnonyl-substituted silanes can be achieved with the [Pt]0 catalyst upon heating at 40 °C for 2 h (Scheme 2).

io2562a_scheme2_fixed

Scheme 2. Hydrosilylation of 3-(but-3-en-1-yl)-4-phenylsydnone.

Then the hydrolytic polycondensation was carried out with the resulting chloro- and ethoxy-substituted silane monomers having the sydnonyl substituent, which is the main method for obtaining polysiloxanes [9, 10]. The polycondensation with the chlorosilanes proceeded faster than that with the ethoxysilanes, which is in good agreement with the literature data (Scheme 3).

io2562a_scheme3_fixed

Scheme 3. Hydrolytic polycondensation of the sydnonyl-substituted silanes.

Experimental section

General procedure for the hydrosilylation reaction. In a flask equipped with a magnetic stirrer and an outlet for inert gas (argon), sydnone 1 (0.3 g) was dissolved in 3 mL of toluene. Then the catalyst (0.1 mol %) was added to the resulting solution. In 15 min, the corresponding silane with a reactive group (0.55 g, a threefold excess relative to the sydnone) was added. The reaction mixture was stirred at 40 °C for several hours. The solvent was removed on a rotary evaporator.

General procedure for the hydrolytic polycondensation. The silane monomer with the reactive group with the sydnonyl substituent (0.5 g) was dissolved in 5 mL of toluene upon stirring, then a threefold excess of water was added. The reaction mixture was stirred for 2 h and left for several days. The organic layer was separated and dried over anhydrous sodium sulfate, filtered and evaporated under vacuum.

Conclusions

New sydnonyl-substituted silane monomers were obtained. Their ability to participate in the hydrolytic polycondensation was demonstrated. Depending on the functionality of the monomer, various siloxane structures (linear, cyclic, and polycyclic) were obtained.

Acknowledgements

This work was performed with financial support from the Ministry of Science and Higher Education of the Russian Federation (agreement no. 075-00276-25-00). The GPC and NMR studies were carried out using the equipment of the Center for Collective Use of INEOS RAS.

Electronic supplementary information

Electronic supplementary information (ESI) available online: the experimental details, NMR spectra, GPC curves. For ESI, see DOI: 10.32931/io2562a.

References

  1. J. Zhang, Y. Chen, M. A. Brook, Langmuir, 2013, 29, 12432–12442. DOI: 10.1021/la403425d
  2. M. Kawase, H. Sakagami, N. Motohashi, Top. Heterocycl. Chem., 2007, 16, 135–152. DOI: 10.1007/7081_2007_096
  3. I. A. Cherepanov, S. K. Moiseev, Adv. Heterocycl. Chem., 2020, 131, 49–164. DOI: 10.1016/bs.aihch.2019.11.003
  4. S. Wiechmann, T. Freese, M. H. H. Drafz, E. G. Hübner, J. C. Namyslo, M. Nieger, A. Schmidt, Chem. Commun., 2014, 50, 11822–11824. DOI: 10.1039/C4CC05461J
  5. I. Ojima, in: Organic Silicon Compounds, S. Patai, Z. Rappoprt (Eds.), Wiley, Chichester, 1989, vol. 1, ch. 25, pp. 1479–1526. DOI: 10.1002/0470025107.ch25
  6. B. C. Auman, V. Percec, H. A. Schneider, H.-J. Cantow, Polymer, 1987, 28, 1407–1417. DOI: 10.1016/0032-3861(87)90460-5
  7. P. Lucas, E. Fleury, J.-F. Estur, V. Lapinte, J.-J. Robin, Macromol. Chem. Phys., 2009, 210, 1933–1941. DOI: 10.1002/macp.200900310
  8. I. A. Cherepanov, S. N. Lebedev, V. N. Kalinin, Synlett, 1998, 667. DOI: 10.1055/s-1998-1739
  9. S. Savard, L.-P. Blanchard, J. Léonard, R. E. Prud'homme, Polym. Compos., 1984, 5, 242–249. DOI: 10.1002/pc.750050403
  10. R. D. C. Richards, J. Hollingshurst, J. A. Semlyen, Polymer, 1993, 34, 4965–4968. DOI: 10.1016/0032-3861(93)90027-8