Home \ Browse Journal \ 2025 \ 2025 Volume 8 Issues 1–3 \ Collagen–Chitosan Scaffold with Silver Nanoparticles and Dihydroquercetin: Preparation and Characterization

2025 Volume 8 Issues 1–3

инэос-open
Open Access
cc-by-nc

INEOS OPEN, 2025, 8 (1–3), 151–152

Journal of Nesmeyanov Institute of Organoelement Compounds
of the Russian Academy of Sciences

Download PDF
Electronic supplementary information
DOI: 10.32931/io2559a

issue_cover_8_1-3.png       

Collagen–Chitosan Scaffold with Silver Nanoparticles and
Dihydroquercetin: Preparation and Characterization

A. N. Tretyakova,* A. V. Naumkin, and A. Yu. Vasil'kov

Nesmeyanov Institute of Organoelement Compounds, Russian Academy of Sciences, ul. Vavilova 28, str. 1, Moscow, 119334 Russia
 

Corresponding author: A. N. Tretyakova, e-mail: anastasia.n.tretyakova@gmail.com
Received 3 November 2024; accepted 13 April 2025

Abstract

io2559a_abs_fig

A new biologically active hybrid material based on a collagen–chitosan scaffold modified with silver nanoparticles and dihydroquercetin was prepared. The nanoparticles were obtained by the ecologically frinedly metal-vapor synthesis. The presence of two Ag0 states surrounded by various nonconducting shells and one Ag+ state was established. The resulting systems are active against the bacteria Staphylococcus aureus, Escherichia coli and the fungus Candida albicans.

Key words: collagen–chitosan scaffold, silver nanoparticles, dihydroquercetin, biological activity, metal-vapor synthesis.

 

Introduction

The improvement of existing medical materials can be made in several directions, one of which is the modification of known materials and their production with better functional properties.

Owing to the unique properties, collagen–chitosan (CollChit) biomaterials with a three-dimensional porous structure are widely used in tissue engineering and regenerative medicine as matrices for the growth and differentiation of various types of cell [1] and as implants or dressings [2, 3].

To obtain functional biomaterials, collagen–chitosan matrices are modified with flavonoids [4], drugs [5, 6], organic [7, 8] and inorganic [9, 10] compounds. One of the most popular directions is the modification of polymeric matrices with metal nanoparticles which, unlike antibiotics, do not cause resistance in microorganisms [11, 12].

The method of chemical reduction is traditionally used for the synthesis of metal nanoparticles [13]. However, the formation of impurities in the form of unrecoverable metal salts, surfactants, and reducing agents complicates its use for medical applications. An alternative is the ecologically friendly metal-vapor synthesis (MVS) [14], which is used to produce silver nanoparticles (AgNPs). In this work, the conjugates of silver nanoparticles with the flavonoid dihydroquercetin (DHQ) and hybrid materials based on a collagen–chitosan matrix were synthesized for the first time. A combination of three components enabled the production of biologically active materials, unlike previously obtained silver-containing collagen–chitosan composites [11]. Their physicochemical properties and biological activity were studied.

Results and discussion

Scheme 1 shows a synthetic route to the CollChit-AgNPs@DHQ material based on the modification of a CollChit sponge with a silver–dihydroquercetin conjugate (AgNPs@DHQ) using MVS.

io2559a_scheme1

Scheme 1. Synthesis of a hybrid material based on a collagen-chitosan scaffold, modified with the silver nanoparticles–dihydroquercetin conjugates.

The morphology of the resulting samples was studied by scanning electron microscopy (SEM). The SEM micrographs of the original collagen–chitosan sponge and CollChit-AgNPs@DHQ, presented in Fig. 1, show that the modification does not change a porous structure of the material.

io2559a_fig1

Figure 1. SEM images of initial CollChit (a) and CollChit-AgNPs@DHQ (b).

Mapping of CollChit-AgNPs@DHQ (see Fig. S1 in the Electronic supplementary information (ESI)) revealed a uniform distribution of AgNPs over the surface of the material. Table S1 in the ESI shows the EDX data of the original and modified samples.

X-ray photoelectron spectroscopy (XPS) was used to analyze the chemical/physical forms of elements on the surface of the materials. The elemental compositions of the samples calculated from the survey spectra are shown in Table S2 in the ESI.

Figure 2a depicts the Ag 3d XPS spectra of AgNPs (1), AgNPs@DHQ (2), and CollChit-AgNPs@DHQ (3). Based on the energy ranges occupied by the C 1s and Ag 3d spectra, it is possible to draw a conclusion about the manifestation of differential charging [15]. The fitting of the C 1s spectrum of CollChit-AgNPs@DHQ (Fig. 2b) is presented as the sum of the model spectrum of dihydroquercetin and the spectrum of the initial CollChit characterized with four carbon states. The characteristics of the selected states are presented in Table S3 in the ESI. The analysis of the Ag 3d spectra of AgNPs@DHQ and CollChit-AgNPs@DHQ revealed the presence of two Ag0 states surrounded by various non-conductive shells and one Ag+ state (see Fig. S2 in the ESI).

io2559a_fig2a io2559a_fig2b

Figure 2. Ag 3d XPS spectra of AgNPs (1), AgNPs@DHQ (2) and CollChit-AgNPs@DHQ (3) (a) and C 1s XPS spectrum of CollChit-AgNPs@DHQ,
the simulated C 1s spectrum of DHQ and their difference spectrum (b).

The analysis of the biological activity of CollChit and CollChit-AgNPs@DHQ materials using the disc diffusion method showed that CollChit is active only against Candida albicans fungus, whereas CollChit-AgNPs@DHQ is effective against the test strains of Staphylococcus aureus, Escherichia coli, and Candida albicans fungus (see Table S4 in the ESI).

Conclusions

The collagen–chitosan scaffold modified with the conjugate of silver nanoparticles and dihydroquercetin was shown to be active against the bacteria Staphylococcus aureus, Escherichia coli and the yeast-like fungus Candida albicans. The interaction of AgNPs with the CollChit surface did not change the morphology of the sample, but led to the appearance of several Ag-containing phases. The results obtained can be used in the creation of medical materials.

Acknowledgements

This work was supported by the Russian Science Foundation (project no. 24-23-00220). The authors are grateful to I. E. Butenko, K. M. Borisov, and A. Yu. Pereyaslavtsev for help in analyzing the materials.

During this work, the equipment of the Center for Collective Use of INEOS RAS was used.

Electronic supplementary information

Electronic supplementary information (ESI) available online: the materials and methods, experimental section, results of EDX and XPS analysis, antimicrobial activity. For ESI, see DOI: 10.32931/io2559a.

References

  1. N. Shanmugasundaram, P. Ravichandran, P. Neelakanta Reddy, N. Ramamurty, S. Pal, K. Panduranga Rao, Biomaterials, 2001, 22, 1943–1951. DOI: 10.1016/S0142-9612(00)00220-9
  2. X. H. Wang, D. P. Li, W. J. Wang, Q. L. Feng, F. Z. Cui, Y. X. Xu, X. H. Song, M. van der Werf, Biomaterials, 2003, 24, 3213–3220. DOI: 10.1016/s0142-9612(03)00170-4
  3. L.-P. Yan, Y.-J. Wang, L. Ren, G. Wu, S. G. Caridade, J.-B. Fan, L.-Y. Wang, P.-H. Ji, J. M. Oliveira, J. T. Oliveira, J. F. Mano, R. L. Reis, J. Biomed. Mater. Res., Part A, 2010, 95, 465–475. DOI: 10.1002/jbm.a.32869
  4. K. C. Loureiro, T. C. Barbosa, M. Nery, M. V. Chaud, C. F. da Silva, L. N. Andrade, C. B. Corrêa, A. Jaguer, F. F. Padilha, J. C. Cardoso, E. Souto, P. Severino, Pharmazie, 2020, 75, 75–81. DOI: 10.1691/ph.2020.9050
  5. M. S. Rubina, E. E. Said-Galiev, A. V. Naumkin, A. V. Shulenina, O. A. Belyakova, A. Yu. Vasil'kov, Polym. Eng. Sci., 2019, 59, 2479–2487. DOI: 10.1002/pen.25122
  6. S. Tripathi, B. N. Singh, D. Singh, G. kumar, P. Srivastava, 3 Biotech, 2021, 11, 160. DOI: 10.1007/s13205-020-02567-w
  7. T. Du, Z. Chen, H. Li, X. Tang, Z. Li, J. Guan, C. Liu, Z. Du, J. Wu, Int. J. Biol. Macromol., 2016, 82, 580–588. DOI: 10.1016/j.ijbiomac.2015.10.039
  8. A. Sionkowska, B. Kaczmarek, K. Lewandowska, S. Grabska, M. Pokrywczyńska, T. Kloskowski, T. Drewa, Int. J. Biol. Macromol., 2016, 89, 442–448. DOI: 10.1016/j.ijbiomac.2016.04.085
  9. J. Becerra, M. Rodriguez, D. Leal, K. Noris-Suarez, G. Gonzalez, J. Mater. Sci. Mater. Med., 2022, 33, 18. DOI: 10.1007/s10856-022-06643-w
  10. T. -Al-Arafat, S. Ahmed, P. C. Karmakar, U. S. Zohora, N. Akhtar, S. M. Asaduzzaman, Int. J. Polym. Sci., 2023, 2023, 6682223. DOI: 10.1155/2023/6682223
  11. M. S. Rubina, E. E. Kamitov, Ya. V. Zubavichus, G. S. Peters, A. V. Naumkin, S. Suzer, A. Yu. Vasil'kov, Appl. Surf. Sci., 2016, 366, 365–371. DOI: 10.1016/j.apsusc.2016.01.107
  12. R. Li, Z. Xu, Q. Jiang, Y. Zheng, Z. Chen, X. Chen, Regener. Biomater., 2020, 7, 371–380. DOI: 10.1093/rb/rbaa008
  13. P. G. Jamkhande, N. W. Ghule, A. H. Bamer, M. G. Kalaskar, J. Drug Deliv. Sci. Technol., 2019, 53, 101174. DOI: 10.1016/j.jddst.2019.101174
  14. A. Vasil'kov, I. Butenko, A. Naumkin, A. Voronova, A. Golub, M. Buzin, E. Shtykova, V. Volkov, V. Sadykova, Int. J. Mol. Sci., 2023, 24, 7667. DOI: 10.3390/ijms24087667
  15. A. Yu. Vasil'kov, A. V. Naumkin, I. O. Volkov, V. L. Podshibikhin, G. V. Lisichkin, A. R. Khokhlov. Surf. Interface Anal., 2010, 42, 559–563. DOI: 10.1002/sia.3269