Home \ Browse Journal \ 2025 \ 2025 Volume 8 Issues 1–3 \ Gas Transport Properties of Metathesis Polynorbornene with the Substituents in the Side Chain Based on beta-(–)-Pinene

2025 Volume 8 Issues 1–3

инэос-open
Open Access
cc-by-nc

INEOS OPEN, 2025, 8 (1–3), 57–59

Journal of Nesmeyanov Institute of Organoelement Compounds
of the Russian Academy of Sciences

Download PDF
DOI: 10.32931/io2518a

issue_cover_8_1-3.png       

Gas Transport Properties of Metathesis Polynorbornene
with the Substituents in the Side Chain Based on
β-(–)-Pinene

P. P. Lezhnin, I. L. Borisov, and M. V. Bermeshev*

Topchiev Institute of Petrochemical Synthesis, Russian Academy of Sciences, Leninskii pr. 29, Moscow, 119991 Russia
 

Corresponding author: M. V. Bermeshev, e-mail: bmv@ips.ac.ru
Received 21 October 2024; accepted 1 December 2024

Abstract

N O O n P(CO 2 ) = 6.7 Barrer a (C O 2 /N 2 ) = 27.9 a (CO 2 /CH 4 ) = 16.8  

The gas separation properties of a high-molecular-weight metathesis polymer based on nadimide containing β-(–)-pinene fragments, synthesized in the presence of the first-generation Grubbs catalyst, were studied. In particular, the permeability and diffusion coefficients for a wide range of gases were determined for the first time. This polymer is characterized by low values of gas permeability coefficients, corresponding to the gas permeability level of polyimides and cellulose acetate. At the same time, the selectivity of separation of gas pairs containing CO2 and O2/N2 pair for the polymer explored is significantly higher than that of the related unsubstituted metathesis polynorbornene.

Key words: β-(–)-pinene, nadimide, polynorbornene, gas transport properties.

 

Introduction

The gas transport properties of polymers play an important role in many industrial and high-tech areas [1], such as packaging industry, membrane technologies, and biomedical engineering. Nowadays, despite the development of different effective polymeric membrane materials for various gas separation processes, the most available but less effective polymers such as cellulose acetate, polysulfones, and polyimides, are used in industry. At the same time, new polymeric materials are actively developed for potential use as selective layers in membrane processes, which combine a set of the required operational characteristics (gas separation selectivity, permeability, stability of properties over time, the possibility of simple synthesis from the available raw materials, etc.) [2–4].

A key element in the development of such materials is the ability to conduct systematic studies of the polymer properties and establish relationships between the structure of the polymer and its properties. Earlier it has been shown that norbornene derivatives represent a promising platform for the synthesis of a series of polymers with different structures of both the main chain and side substituents, and a number of highly permeable membrane materials and polymers combining high selectivity relative to CO2-containing gas vapors have been synthesized on their basis.

In turn, terpenes are available natural organic compounds that are widely used in industry for the production of polymers. The production of polymers based on terpenes has a number of advantages and is highly urgent, since it allows for reducing the environmental impact and the amount of waste.

In this work, the gas transport properties of a polymer combining in its structure the fragments and advantages of both norbornene derivatives and terpenes were studied for the first time. In particular, the main chain of the studied polymer was formed by the norbornene units, while the side substituents contain the fragments of one of the most available terpenes, namely, β-(–)-pinene.

Results and discussion

A sample of the metathesis polymer based on nadimide containing β-(–)-pinene fragments (PNBpin) was synthesized by the previously described method in the presence of the first-generation Grubbs catalyst (Fig. 1) [5]. The resulting polymer is high-molecular (Mn = 9.6·105, Mw/Mn = 3.0), glassy, and amorphous (Table 1).

N O O n PNBpin n PNB  

Figure 1. Structures of PNBpin and PNB.

Table 1. Selected basic properties of PNBpin in comparison with PNB and CA

Polymer
Tg, °C
Td, °C
d1, Å
d, g/cm3
FFV, %
PNBpin
188
405
5.4
1.179
13
PNB [6]
41
415
4.9
0.999
15
CA [7]
186
–
5.2
1.300
14.7–16.1 [8–10]

The glass transition temperature of PNBpin was significantly higher than that of the related unsubstituted metathesis polynorbornene (PNB, Fig. 1, Table 1) and was close to the glass transition temperature of cellulose acetate (CA), an industrial polymeric membrane material. At the same time, for all three polymers, the d-distances (d1, Table 1), estimated from the X-ray diffraction data, and the fractions of free volume (FFV), calculated based on the polymer density and the volume occupied by the polymer molecules, were very close.

The permeability through PNBpin was investigated for a range of gases (He, H2, N2, O2, CO2, CH4). The resulting values of gas permeability coefficients, selectivities, as well as diffusion and solubility coefficients are given in Tables 2 and 3. For PNBpin, the following series of gas permeability coefficients was observed: P(H2) ~ P(He) > P(CO2) > P(O2) > P(CH4) > P(N2), i.e., the change in the gas permeability coefficients did not fully correlate with the corresponding kinetic diameters of the gas molecules under consideration. PNBpin appeared to be less permeable than the unsubstituted metathesis polynorbornene and was comparable in the gas permeability to CA. A difference in the gas permeability of PNBpin and PNB is mainly due to the difference in the diffusion coefficients (Table 2). Thus, although it is generally accepted that the introduction of bulky and rigid groups into the side chains of polymers leads to an increase in the gas permeability [4, 11], in the case of the simultaneous presence of polar groups in the side chains, the effect of introducing a bulky substituent can be leveled out, for example, as for PNBpin.

Table 2. Permeability, diffusivity, and solubility coefficients of various gases for PNBpin
in comparison with PNB and CA (30 °C and 0.6 bar upstream pressure)

Polymer
Permeability coefficient, Barrera
Не
H2
N2
O2
CO2
CH4
PNBpin
12.7
13.0
0.24
1.50
6.7
0.40
PNB [6]
14.9
18.0
0.43
2.3
9.3
0.78
CA [7]
–
14.9
0.23
1.05
5.96
0.205
Diffusivity coefficient (D),·D·1010, cm2·s−1
PNBpin
–
–
170
550
140
56
PNB [6]
–
–
360
1280
550
150
Solubility coefficient (S), S·103, cm3(STP)·cm−3·cm Hg−1
PNBpin
–
–
1.3
2.7
50
7.1
PNB [6]
–
–
1.2
1.8
16.8
5.3
a 1 Barrer = 10–10 cm3 (STP)cm (cm2·s·cm·Hg)–1.

The ideal gas separation selectivities for PNBpin significantly exceed the corresponding values for more permeable PNB and, in some cases, for CA (Table 3). In particular, a high value of selectivity for the CO2/N2 pair (more than 25) was obtained for PNBpin, which indicates its high potential as a promising membrane material for further detailed studies.

Table 3. Ideal permeability selectivities for different pairs of gases for PNBpin in comparison with PNB and CA

Polymer
Ideal selectivity (α = Pi /Pj)
O2/N2
CO2/N2
CO2/CH4
H2/N2
PNBpin
6.3
27.9
16.8
54.2
PNB [6]
5.2
21.0
11.9
41.9
CA [7]
4.5
25.8
29.2
64.5

Experimental section

To study gas permeability, the films 80–90 μm in thickness were cast from a 5% polymer solution in chloroform. After evaporation of the solvent, the films were evacuated at room temperature for 24 h until constant weight. The coefficients of permeability and diffusion of gases through the membranes were determined by the Daines–Barrer method on a precision Helmholtz-Zentrum Geesthacht unit equipped with a Baratron pressure sensor with an accuracy of 10–7 atm and described in detail elsewhere [12]. The sorption coefficient was found as the ratio of the permeability coefficient to the diffusion coefficient.

Conclusions

The gas transport properties of the metathesis polynorbornene containing β-(–)-pinene fragments were studied for the first time: the permeability and diffusion coefficients were determined, and the solubility coefficients for He, H2, O2, N2, CO2, and CH4 were calculated. It was shown that PNBpin is less permeable and significantly more selective than the unsubstituted metathesis polynorbornene. The gas separation selectivities of PNBpin for some gas pairs (O2/N2, CO2/N2) exceeded the corresponding values for cellulose acetate, an industrial polymeric membrane material.

Acknowledgements

This work was supported by the Russian Science Foundation (project no. 20-13-00428-P).

References

  1. A. Y. Alentiev, V. E. Ryzhikh, D. A. Syrtsova, N. A. Belov, Russ. Chem. Rev., 2023, 92, RCR5083. DOI: 10.59761/RCR5083
  2. W. Liu, Y. Yang, L. Guo, J. Di, C. H. Lau, M. V. Bermeshev, L. Shao, Chem. Eng. J., 2024, 498, 155569. DOI: 10.1016/j.cej.2024.155569
  3. I. I. Ponomarev, K. M. Skupov, K. A. Lyssenko, I. V. Blagodatskikh, A. V. Muranov, Y. A. Volkova, D. Y. Razorenov, I. I. Ponomarev, L. E. Starannikova, D. A. Bezgin, A. Y. Alentiev, Y. P. Yampolskii, Mendeleev Commun., 2020, 30, 734–737. DOI: 10.1016/j.mencom.2020.11.015
  4. M. V. Bermeshev, E. S. Finkelshtein, INEOS OPEN, 2018, 1, 39–54. DOI: 10.32931/io1802r
  5. P. P. Lezhnin, I. V. Nazarov, M. V. Bermeshev, Russ. J. Appl. Chem., 2023, 96, 794–800. DOI: 10.1134/S1070427223080037
  6. N. A. Belov, M. L. Gringolts, A. A. Morontsev, L. E. Starannikova, Y. P. Yampolskii, E. S. Finkelstein, Polym. Sci., Ser. B, 2017, 59, 560–569. DOI: 10.1134/s1560090417050025
  7. J. Li, K. Nagai, T. Nakagawa, S. Wang, J. Appl. Polym. Sci., 1995, 58, 1455–1463, DOI: 10.1002/app.1995.070580906
  8. M. Mubashir, Y. F. Yeong, K. K. Lau, T. L. Chew, J. Norwahyu, Sep. Purif. Technol., 2018, 199, 140–151. DOI: 10.1016/j.seppur.2018.01.038
  9. B. Lam, M. Wei, L. Zhu, S. Luo, R. Guo, A. Morisato, P. Alexandridis, H. Lin, Polymer, 2016, 89, 1–11, DOI: 10.1016/j.polymer.2016.02.033
  10. G. Q. Chen, S. Kanehashi, C. M. Doherty, A. J. Hill, S. E. Kentish, J. Membr. Sci., 2015, 487, 249–255. DOI: 10.1016/j.memsci.2015.03.074
  11. Y. He, F. M. Benedetti, S. Lin, C. Liu, Y. Zhao, H. Z. Ye, T. Van Voorhis, M. G. De Angelis, T. M. Swager, Z. P. Smith, Adv. Mater., 2019, 31, e1807871. DOI: 10.1002/adma.201807871
  12. M. Macchione, J. C. Jansen, G. De Luca, E. Tocci, M. Longeri, E. Drioli, Polymer, 2007, 48, 2619–2635. DOI:  10.1016/j.polymer.2007.02.068