Home \ Browse Journal \ 2025 \ 2025 Volume 8 Issues 1–3 \ Synthesis and Structure of [Sb(mu2-O)Cl(DMSO-О)]n

2025 Volume 8 Issues 1–3

инэос-open
Open Access
cc-by-nc

INEOS OPEN, 2025, 8 (1–3), 52–53

Journal of Nesmeyanov Institute of Organoelement Compounds
of the Russian Academy of Sciences

Download PDF
Electronic supplementary information
DOI: 10.32931/io2515a

issue_cover_8_1-3.png       

Synthesis and Structure of [Sb(m2-O)Cl(DMSO-О)]n

I. V. Egorova,*a I. N. Nesina,a V. V. Zhidkov,a N. A. Rodionova,a
N. V. Kuratieva,b and N. V. Pervukhinab

a Blagoveshchensk State Pedagogical University, Blagoveshchensk, ul. Lenina 104, 675004 Russia
b Nikolaev Institute of Inorganic Chemistry, Siberian Branch of the Russian Academy of Sciences, pr. Akademika Lavrent'eva 3, Novosibirsk, 630090 Russia

 

Corresponding author: I. V. Egorova, e-mail: bgpu.chim.egorova@mail.ru
Received 18 October 2024; accepted 17 January 2025

Abstract

79% O Me O Me Sb HCl , H 2 O , DMSO Sb DMSO Cl O 3 n  

New complex [Sb(m2-O)Cl(DMSO-О)]n was obtained by the interaction of tris(2,6-dimethoxyphenyl)stibine with HCl in chloroform followed by the recrystallization of the product from DMSO. X-ray diffraction analysis revealed a distorted trigonal bipyramidal bisphenoidal environment of the antimony atoms, with the axial angles O–Sb–Cl of 163.8(3), 164.1(3)° and the interatomic distances m2-O–Sb and Sb–Oax of 1.948(9), 1.973(9) Å and 2.242(10), 2.194(11) Å, respectively.

Key words: triarylstibine, hydrochloric acid, dimethyl sulfoxide, Lewis acid, structure, synthesis.

 

Introduction

Recently, the possibility of using antimony(III,V) compounds as the reagents and catalysts in organic synthesis, as well as medicinal, antiseptic and antimicrobial drugs has been disclosed [1]. Antimony oxohalides can be used as electrodes for sodium and lithium-ion batteries and demonstrate excellent fire-retardant properties [2, 3]. The research into the reactions of triorganylstibines with HCl dates back to the twenties of the last century. However, this interaction was studied on a small number of organoantimony compounds. The reaction with hydrochloric acid is accompanied by the dearylation of triorganylstibine and/or its oxidation (Sb(III) → Sb(V)), which is dictated by the nature of the substituent that determines the strength of the Sb–C bond, acid concentration, solvent nature, and temperature [4]. Trialkylstibines (Alk = Me, Et, Bn, Cy) are oxidized under the action of HCl to Alk3SbCl2. Tri-α-thienylstibine is completely dearylated with hydrochloric acid to form antimony trichloride and thienyl chloride. The formation of Ar2SbCl and ArH occurs when a saturated alcohol solution of HCl is attacked with Ar3Sb (Ar = Ph, p-Tol, 3-NH2C6H4, 4-MeC(O)NHC6H4). An increase in the acid concentration and heating duration leads to the more complete dearylation of triphenylstibine alone, while the use of concentrated aqueous acid in this reaction is accompanied by the formation of antimony trichloride. Triphenylstibine is oxidized by atmospheric oxygen in the presence of HCl to Ph3SbCl2 [4]. Consequently, it is impossible to unambiguously predict the composition of the reaction products, which arouses interest to this problem. To date, the interaction of tris(2,6-dimethoxyphenyl)stibine with HCl has not been described.

Results and discussion

The reaction of tris(2,6-dimethoxyphenyl)stibine with HCl was performed in chloroform. The reaction product was antimony(III) oxochloride, which is insoluble in chloroform. Its identification was performed by the melting point (Tdec. = 170 °C, which corresponds to the literature data [5]) and IR spectrum (ν(SbO) = 725 cm–1 [5]) (see Fig. S1 in the Electronic supplementary information (ESI)). Antimony(III) oxochloride is likely to result from the hydrolysis of antimony trichloride, preliminarily formed in HCl solution. The precipitate was recrystallized from DMSO to give [Sb(μ2-O)Cl(DMSO-O)]n (Scheme 1).

io2515a_scheme1

Scheme 1. Synthesis of [Sb(m2-O)Cl(DMSO-O)]n.

The IR spectrum of [Sb(m2-O)Cl(DMSO-О)]n exhibits a broad band of ν(SO) stretches at 906, 922 cm–1, which are shifted to longer wavelengths compared to the spectrum of the free DMSO molecule, indicating the coordination of DMSO through the oxygen atom. By retaining a lone pair of electrons on the antimony atom, antimony oxochloride behaves like a Lewis acid towards the neutral O-donor ligand molecule. The antimony atoms in [Sb(m2-O)Cl(DMSO-О)]n have a distorted trigonal bipyramidal bisphenoidal coordination with the axially located oxygen atoms of the DMSO molecule and chlorine (Fig. 1). The selected interatomic distances are as follows: Sb1–O1 2.242(10) Å, Sb1–Сl1 2.646(3), Sb2–O2 2.194(11), Sb2–Сl2 2.655(4) Å. Cl1–Sb1–O1 and Cl2–Sb2–O2 bond angles are 163.8(3), 164.1(3)°. In the equatorial plane, there are bridging oxygen atoms and a lone electron pair of an antimony atom.

The oxygen atoms (О3, О4) perform only the m2-bridging structural function, joining the adjacent molecule fragments SbOCl(DMSO) into polymer chains in the complex (Fig. 1). The selected interatomic distances are as follows: Sb1–O3 1.948(9), Sb1(Sb2)–O4(О3) 1.973(9) Å. Antimony(III) oxochlorides SbOCl [5, 6], Sb2OCl4 [5], Sb3O4Cl [7], Sb4O5Cl2 [8], and Sb8O11Cl2 [9], derived from antimony(III) chloride or antimony(III) oxide, have a polymeric structure. The coordination polyhedra of an antimony atom are the distorted trigonal bipyramid [SbO4E] [5–7, 9], [SbO3ClE] [6, 7], SbO2Cl2E, SbOCl3E [5] or the distorted tetrahedron [SbO2ClE] [6], [SbO3E] [8, 9]. The Sb–O distances are determined by the coordination polyhedron of antimony atoms and the m2-/m3-bonding role of chlorine atoms. In tetrahedra, the Sb–O distances vary in a smaller range of values (1.898(0)–2.459(4) Å) compared to the trigonal bipyramid (1.947(6)–2.59(2) Å) [5–9]. The oxygen atom bonded to only two antimony atoms is always a short distance away.

io2515a_fig1

Figure 1. Fragment of a polymer chain of [Sb(m2-O)Cl(DMSO-О)]n. Thermal ellipsoids are drawn at the 50% probability level.

Experimental section

The IR spectra (KBr) were recorded on an FSM-2202 interference FT-IR spectrometer in the range of 400–4000 cm–1. The elemental analysis was performed on a Carlo Erba CHN analyzer (model 1106). The 1H NMR spectra were recorded on a Bruker Avance III HD 500 spectrometer with an operating frequency of 500.13 MHz at room temperature. The X-ray diffraction analysis was performed on a Bruker Nonius X8Apex diffractometer with a 4K CCD detector using φ- and ω-scanning. The corrections for absorption were introduced with the aid of the SADABS program [10]. The structures were solved by the direct method and refined by the full-matrix F2 MNC method in the anisotropic approximation for non-hydrogen atoms using the SHELXT-2014/5 software package [11]. CCDC 2389596 contains the supplementary crystallographic data for the compound explored (http://www.ccdc.cam.ac.uk/).

Synthesis of [Sb(m2-O)Cl(DMSO-О)]n. A solution of hydrochloric acid (32%, 1.1 mL, 11.25 mmol) was added to a stirred solution of tris(2,6-dimethoxyphenyl)stibine (2.00 g, 3.75 mmol) in 50 mL of CHCl3. The reaction mixture was heated at ~ 50 °C for 2 h. The resulting precipitate was filtered off and washed with CHCl3 (2×10 mL). The solvent was evaporated. The IR and NMR spectra of m-dimethoxybenzene, obtained after evaporation of chloroform, are identical to those of the known compound. IR (ν/cm–1): νas,s(CAr–O–CMe) 1210, 1050, νas,s(CAr–CAr) 1600, 1494, νas,s(CMe–H) 2959, 2836 (see Fig. S2 in the ESI). 1H NMR: δ 3.84 (6H, 1,3-CH3–O), 6.58 (H, 2-Ph), 6.57 (2H, 4,6-Ph), 6.53 (H, 5-Ph), 7.24 (Н, СDCl3), 1.72 (Н, Н2О) ppm. The product (SbOCl) was dissolved in 5 mL of DMSO. The crystals were obtained by the slow evaporation of DMSO at ambient temperature (5 days). Yield: 0.75 g (79%). Mp: 225 °C. IR (ν/cm–1): νas(CH3) 3008, 2988, νs(CH3) 2910, ν(SO) 906, 922, ν(SbO) 725, ν(СS) 611 (see Fig. S3 in the ESI). Anal. Calcd. for C2H6ClO2SSb: C, 9.56; H, 2.41. Found: C 9.37; H 2.65%. As a result of the analysis carried out on a JXA-8100 microprobe, the single-phase nature of the target product was established (Sb, Cl, S wt/at % 38.40–42.18/71.83–74.06, 13.95–14.63/25.61–27.44, and 9.80–12.11/21.20–25.82, respectively).

Conclusions

The interaction of tris(2,6-dimethoxyphenyl)stibine with hydrochloric acid (in a 1:3 molar ratio) upon heating leads to the complete dearylation of the organoantimony compound. The complex of antimony(III) with dimethyl sulfoxide was synthesized and studied. According to the results of X-ray diffraction analysis, the antimony atoms have distorted trigonal bipyramidal bisphenoidal coordination.

Electronic supplementary information

Electronic supplementary information (ESI) available online: the IR spectra. For ESI, see DOI: 10.32931/io2515a.

References

  1. V. V. Sharutin, A. I. Poddel'sky, O. K. Sharutina, Russ. J. Coord. Chem., 2020, 46, 663–728. DOI: 10.1134/S1070328420100012
  2. K. P. Lakshmi, K. J. Janas, M. M. Shaijumon, Carbon, 2018, 131, 86–93. DOI: 10.1016/j.carbon.2018.01.095
  3. L. Costa, G. Paganetto, G Bertelli, G. Camino, J. Therm. Anal., 1990, 36, 1141–1153. DOI: 10.1007/BF01904648
  4. K. A. Kocheshkov, A. P. Skoldinov, N. N. Zemlyanskii, Methods of Organoelement Chemistry. Antimony, Bismuth, Nauka, Moscow, 1976 (in Russian).
  5. C. Hu, D. Chu, X. Hou, F. Zhang, J. Han, Inorg. Chem. Front., 2024, 11, 3367–3376. DOI: 10.1039/D4QI00564C
  6. M. Edstrand, Arkiv Kemi, 1953, 6, 89–112.
  7. H. Katzke, Y. Oka, Y. Kanke, K. Kato, T. Yao, Z. Kristallogr. Cryst. Mater., 1999, 214, 284–289. DOI: 10.1524/zkri.1999.214.5.284
  8. C. Särnstrand, Acta Cryst., Sect. B, 1978, 34, 2402–2407. DOI: 10.1107/S056774087800833X
  9. Z. Mayerová, M. Johnsson, S. Lidin, Solid State Sci., 2006, 8, 849–854. DOI: 10.1016/j.solidstatesciences.2006.04.010
  10. Bruker AXS Inc., APEX2 (Version 1.08), SAINT (Version 7.03), and SADABS (Version 2.11). Bruker Advanced Xray Solutions, Madison, Wisconsin, USA, 2004.
  11. G. M. Sheldrick, Acta Crystallogr., Sect. A: Found. Adv., 2015, 71, 3–8. DOI: 10.1107/S2053229614024218