2025 Volume 8 Issues 1–3
|
INEOS OPEN, 2025, 8 (1–3), 7–9 Journal of Nesmeyanov Institute of Organoelement Compounds Download PDF |
|
Synthetic Approaches to 18-Triazacrown-6 Ether
and a Lead Complex of Its Вipyridyl Derivative
a Nesmeyanov Institute of Organoelement Compounds, Russian Academy of Sciences, ul. Vavilova 28, str. 1, Moscow, 119334 Russia
b Mendeleev University of Chemical Technology of Russia, Miusskaya pl. 9, Moscow, 125047 Russia
Corresponding author: A. A. Shchukina, e-mail: annbakhareva@yandex.ru
Received 10 September 2024; accepted 10 October 2024
Abstract

In this study, an 18-membered triazacrown ether was prepared using three synthetic approaches to compare their efficiency. The method utilizing the macrocyclization reaction through the formation of a Schiff base turned out to be the most convenient one. The complexing features of new chelator PADPy bearing two pyridyl chelating groups towards Pb2+ ions was studied by ESI MS and 1H NMR spectroscopy. The formation of an inclusive complex of 1:1 composition was shown.
Key words: complexation, triazacrown ether, chelator, ligand, lead.
Introduction
Macrocyclic ligands based on azacrown compounds find wide application in many areas, since the selective complexation of metal ions is an important problem [1–3]. It is known that the components of radiopharmaceuticals are macrocyclic ligands based on crown compounds, and both nitrogen- and oxygen-containing crown ethers are developed [4–6]. Crown ethers containing only oxygen heteroatoms are used as extractants for radioactive cations in the reprocessing of spent nuclear fuel, which is explained by the high resistance of crown ethers to radiation [7]. An attractive idea is the development of crown compounds combining N,O-heteroatoms in their composition [8]. For these crown ethers, one can expect the resistance to radiation, low dependence of complexation on the medium acidity, as well as the possibility of introducing additional chelating groups. An interesting type of ligands are double-armed crown ethers. In this class of compounds, the metal ion can be wrapped in such a way that the additional donor groups would provide its more efficient coordination in the macrocyclic cavity. In this communication, we compared the synthetic approaches to an N,O-containing 18-membered crown ether to identify the most convenient method. In addition, the chelating pyridyl groups were introduced into the triazacrown structure to yield chelator PADPy. The introduction of chelating groups ensures an increase in the cation-binding ability and selectivity of the ligand [9].
Results and discussion
To obtain pyridine-containing triazacrown compound 3, three methods were employed to compare their efficiency (Scheme 1). Method A involved three steps. The first step was the macrocyclization reaction between diester 1 and 1,11-diamino-3,6,9-trioxaundecane without using a high dilution technique. Then bis(amide) macrocycle 2 was reduced using BH3·THF complex. However, the purification of target product 3 from the intermediate was complicated by the incomplete reduction, so the overall yield determined by NMR spectroscopy was 24%. According to methods B and C, diester 1 was reduced to 2,6-di(hydroxymethyl)pyridine 4 using NaBH4. In method B, 4 was reacted with thionyl chloride to give 2,6-di(chloromethyl)pyridine 5, and then the macrocyclization reaction with the diamine was accomplished in the presence of K2CO3. In this case, the macrocyclization process was accompanied by oligomerization, which complicated the isolation and purification of target triazacrown compound 3. The yield of 3 according to the NMR spectroscopic analysis was 2% in three stages. Varying the solvent and the temperature of the process did not afford positive results. According to method C, the macrocyclization reaction using CaCl2 as a template was carried out between the diamine and pyridine-2,6-dicarbaldehyde 6, which was obtained by oxidation of 4 using SeO2. The reduction of Shiff base 7 using NaBH4 allowed us to isolate target product 3 in a total yield of 77% in four stages. To summarize, method C appeared to be the most optimal one. Despite a greater number of stages, it leads to the highest total yield of triazacrown compound 3 and does not require complex and time-consuming purification methods.

Scheme 1. Methods for the synthesis of crown compund 3.
At the next step, the pyridyl chelating groups were introduced into the structure of macrocycle 3 with 71% yield (Scheme 2). The introduction of additional donor centers into the structure provides selectivity for corresponding metal ions and increases denticity. The pyridyl groups are intermediate according to Pearson's HSAB theory [10, 11], which allows them to effectively bind with soft and intermediate metal cations.

Scheme 2. Synthesis of ligand PADPy.
The possibility of forming a complex of resulting ligand PADPy with Pb2+ ions was demonstrated using ESI mass spectrometry. The formation of a single complex with a stoichiometric M:L ratio of 1:1 was observed. The structure of Pb-PADPy complex was studied by 1H NMR spectroscopy (Fig. 1). The complex was synthesized in situ at room temperature by adding Pb(ClO4)2 to a solution of PADPy in a D2O–CD3CN mixture (1:1). The assignment of the signals in the 1H NMR spectra was carried out using homonuclear 2D correlation methods 1H–1H COSY and 1H–1H ROESY. It was noted that the number of signals in the aliphatic region of the spectrum of complex Pb-PADPy doubled compared to those in the spectrum of free ligand PADPy. At the same time, the number of signals in the aromatic region did not change. This indicated the formation of C2-symmetric Pb-PADPy complex in solution, where the geminal protons are not magnetically equivalent due to the rigid fixation of the ligand molecule by the Pb2+ ion. In addition, all signals in the 1H NMR spectrum of the complex appeared to be shifted downfield, which is explained by the polarizing effect of Pb2+ ions on the protons located close to the donor centers of the ligand. Therefore, it can be concluded that all eight heteroatoms of the ligand PADPy participate in the binding with the Pb2+ ion, i.e., resulting Pb-PADPy complex has a coordination number of eight. It is known that the size of the macrocyclic cavity of 18-crown-6 ether (r = 1.3–1.6 Å) [12] corresponds well to the size of the Pb2+ ion (r = 1.35 Å with a coordination number of 8) [13]. Thus, it is most likely that the interaction of the Pb2+ ion with PADPy in solution leads to the formation of an inclusive complex with the pyridyl groups which completely encapsulate Pb2+, coordinating with it from the opposite sides of the macrocycle. These results are consistent with those obtained by mass spectrometry (Figs. 1 and S6 in the Electronic supplementary information (ESI)). Such a structure of Pb-PADPy complex can provide high resistance to transchelation of the Pb2+ ion in biological environments.

Figure 1. 1H NMR spectra and ESI MS of free ligand PADPy and its complex Pb-PADPy in D2O–CD3CN.
Conclusions
Three approaches to the synthesis of the 18-membered N,O-containing crown ether were studied. It was found that the most suitable one is method C including the formation of a Schiff base. Bipyridyl chelator PADPy based on the 18-triazacrown-6 ether was obtained and its complexation with Pb2+ was studied. It was shown that mononuclear complex Pb-PADPy is inclusive, which can ensure the stability of the complex in biological environments, making the chelator promising for further research.
Acknowledgements
This work was supported by the Russian Science Foundation (project no. 23-73-01270). The NMR and ESI MS studies were performed using the equipment of the Center for Molecular Composition Studies of INEOS RAS.
Electronic supplementary information
Electronic supplementary information (ESI) available online: the experimental section, the synthesis and the NMR spectra of the compounds obtained. For ESI, see DOI: 10.32931/io2503a.
References
- R. E. Mewis, S. J. Archibald, Coord. Chem. Rev., 2010, 254, 1686–1712. DOI: 10.1016/j.ccr.2010.02.025
- A. A. Shchukina, A. D. Zubenko, V. A. Karnoukhova, Yu. V. Fedorov, O. A. Fedorova, J. Struct. Chem., 2024, 65, 561–573. DOI: 10.1134/S0022476624030119
- M. Enel, N. Leygue, N. Saffon, C. Galaup, C. Picard, Eur. J. Org. Chem., 2018, 1765–1773. DOI: 10.1002/ejoc.201800066
- E. Boros, B. V. Marquez, O. F. Ikotun, S. E. Lapi, C. L. Ferreira, in: Ligand Design in Medicinal Inorganic Chemistry, T. Storr (Ed.), Wiley, Chichester, 2014, pp. 47–79. DOI: 10.1002/9781118697191.ch3
- A. Hu, E. Aluicio-Sarduy, V. Brown, S. N. MacMillan, K. V. Becker, T. E. Barnhart, V. Radchenko, C. F. Ramogida, J. W. Engle, J. J. Wilson, J. Am. Chem. Soc., 2021, 143, 10429–10440. DOI: 10.1021/jacs.1c05339
- N. Herrero Álvarez, D. Bauer, J. Hernández-Gil, J. S. Lewis, ChemMedChem, 2021, 16, 2909–2941. DOI: 10.1002/cmdc.202100135
- F. W. B. van Leeuwen, W. Verboom, D. N. Reinhoudt, Chem. Soc. Rev., 2005, 34, 753–761. DOI: 10.1039/b506073g
- M. K. Blei, L.Waurick, F. Reissig, K. Kopka, T. Stumpf, B. Drobot, J. Kretzschmar, C. Mamat, Inorg. Chem., 2023, 62, 20699–20709. DOI: 10.1021/acs.inorgchem.3c01983
- P. C. Junk, M. K. Smith, Inorg. Chem. Comm., 2002, 5, 1082–1085. DOI: 10.1016/S1387-7003(02)00665-2
- D. Datta, Inorg. Chem., 1992, 31, 2797–2800. DOI: 10.1021/ic00039a025
- R. G. Pearson, Chemical Hardness, Wiley, Weinheim, 1997. DOI: 10.1002/3527606173
- J. W. Steed, Coord. Chem. Rev., 2001, 215, 171–221. DOI: 10.1016/S0010-8545(01)00317-4
- R. D. Shannon, Acta Cryst., 1976, A32, 751–767. DOI: 10.1107/S0567739476001551

